Echo LS21 Instruction v.3 Manuel d'utilisateur
Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel de jardinage Echo LS21 Instruction v.3. Echo LS21 Instruction v.3 User Manual Manuel d'utilisatio
- Page / 8
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
Instructions
PN 36323-00
Rev. 010112
SUBJECT: QUICK SPLIT (PN
75896-00) AND THROTTLE DOWN
(PN 75899-00) KITS
FITS MODELS: ALL LOG
SPLITTERS*
Before inspecting or servicing any part of this machine,
shut off power source, remove key, disconnect the
battery cables and make sure all moving parts have
come to a complete stop.
WARNING
1. Install the channel and angle mount assembly on the
right side of the log splitter in the channel with two
3/8 x 3/4" self-tapping hex bolts. IMPORTANT: If your
log splitter does not have the hex bolt holes already
pre-drilled, see Appendix 1 on page 8 for drilling
instructions.
2. Do not completely tighten bolts at this point. Allow
enough movement to assist in completion of
assembly
3. Pull knob on angle mount assembly out to install slider
plate into channel mount as shown in Figures 3 and
4.
INSTALLATION
NOTE
If the throttle down kit is installed on model LS21160,
you will first need to install a new Control Assembly.
Contact your local Honda dealer to order part #
16500-ZL8-800.
Figure 1. Channel and angle mount assembly
Figure 2. Channel and angle mount assembly
Figure 3. Pull knob out to install slider plate
Figure 4. Slider plate installed
NOTE
Throttle Down Kit #75899-00 is not designed for use
on LS21 and LS21E Log Splitter models
Résumé du contenu
Page 1 - Instructions
InstructionsPN 36323-00Rev. 010112SUBJECT: QUICK SPLIT (PN 75896-00) AND THROTTLE DOWN (PN 75899-00) KITSFITS MODELS: ALL LOG SPLITTERS* Before i
Page 2 - SLIDE ANGLE
Instruction Sheet26. Install spring on angle assembly. See Figure 7.7. Remove the existing valve handle by removing the two pins and cottter pins th
Page 3 - CABLE CLAMP
Instruction Sheet3Figure 11. Reinstall lever knobFigures 12 & 12a. Connecting slide angle and new handleFigure 13. Throttle cable installed in cab
Page 4 - Instruction Sheet
Instruction Sheet420. Remove the wire stop from the throttle cable by loosening the bolt.21. Attach the cable stop with a screw supplied with the th
Page 5 - OPERATION
Instruction Sheet522. Hook the spring between the lever bottom sheet and the mount angle. On the quick split kit adjustment may be necessary in orde
Page 6 - QUICk SPLIT kIT PARTS DIAGRAM
Instruction Sheet6QUICk SPLIT kIT (PN 75896-00)Item Part # Description Qty.1 12177SPRING, HEAVY DUTY COMPRESSION12 14048-00 CLAMP, 9/16" COATED 1
Page 7 - Item Part # Description Qty
Instruction Sheet7THROTTLE DOWN kIT PARTS DIAGRAMTHROTTLE DOWN kIT (PN 75899-00)Item Part # Description Qty.1 14048-00 CLAMP, 9/16" COATED 12 150
Page 8 - APPENDIX 1
ECHO BEAR CATwww.bearcatproducts.com237 NW 12th Street, West Fargo, ND 58078-0849Phone: 701.282.5520 • Toll Free: 800.247.7335 • Fax: 701.282.9522E-ma
Produits connexes et manuels pour Matériel de jardinage Echo LS21 Instruction v.3
(18 pages)
(59 pages)
© 2020, manymanuals.fr. Tous droits réservés | 0.525 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels