Echo CS-330T Serial C04212001001 - C04212999999 Manuel d'utilisateur Page 26

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 48
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 25
26 X7503245101
© 08/2013 ECHO Inc.
OPERATION CS-330T
Chain And Guide Bar Combination
The following combinations are recommended for model CS-330T.
Use of replacement saw chain and/or guide bar other than that specified, or operation without the
“tip guard” in place, may cause severe kickback resulting in serious injury.Only use saw chain
designated as, “LOW-KICKBACK,” that meets ANSI B175.1 or CSA Z62.1, .3 Standard when tested
on the representative sample of chain saws below 3.8 C.I.D., and Echo guide bar specified.
Chain and guide bar gauge size must be identical. Use Bar/Chain combinations shown in table above.
If your tip guard is damaged or lost, contact your Echo dealer for a replacement. For the name of the Echo
dealer nearest you, Call: 1-800-432-ECHO (3246) or on the web at
www.echo-usa.com.
Refer to your Chain Saw Safety Manual for tip guard application information.
Guide Bar
(Low-kickback)
Replacement guide bars.
The following guide bars may be considered to have equivalent kickback energy.
Sprocket nose guide bars of the same length and nose radius, same pitch and having the same number of
teeth.
Hard nose guide bars of the same length and nose radius as a sprocket nose bar.
Saw Chain
(Low-kickback)
Do not use replacement saw chain unless it has been designated as meeting ANSI B175.1 or CSA
Z62.1, .3 kickback performance requirements, when tested on the representative sample of chain
saws below 3.8 c.i.d. specified in ANSI B175.1 or CSA 62.1, .3.
Note: LOW KICKBACK SAW CHAIN meets the kickback performance requirements of ANSI B175.1 or CSA
62.1, .3 (safety requirements for gasoline-powered chain saws).
Model Bar Length
Low Kickback Guard Bar Low Kickback Saw Chain Kick Guard
Bar P/N
Chain Part NO. Links Type Pitch Gauge Echo P/N
(OEM P/N)
CS-330T
12”
12A0CD3745
91PX-45
91VG-45
45
91PX
91VG
3/8” 0.050
2894901
28949
14”
14A0CD3752
91PX-52
91VG-52
52
16” 16A0CD3757 91PX-57
91VG-57
57
Vue de la page 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Commentaires sur ces manuels

Pas de commentaire