Echo PB-403T Manuel d'utilisateur télécharger pdf (Page 16)

STARTING WARM ENGINE

PB-403H

1. Throttle Lever

Move throttle lever (A) to IDLE DETENT position.

PB-403T

1. Throttle Lever/Stop Switch

Move throttle lever (A) forward to idle position. Slide stop switch

(B) forward to run position.

PB-403H, PB-403T

2. Recoil Starter

Pull recoil starter handle (E) and engine should start. Do not use

choke (C).

NOTE

If engine does not start after 5 pulls, use cold start procedures.

STOPPING ENGINE

PB-403H

1. Throttle Lever

Move throttle lever (A) to idle detent position and allow engine to

return to idle before shutting off engine.

2. Throttle Lever

Move throttle lever (A) to "O" (Stop) position.

PB-403T

1. Throttle Lever

Release thottle trigger (F). Move throttle lever (A) forward to idle

position and allow engine to return to idle before shutting off

engine.

2. Stop Switch

Slide stop switch (B) to Stop position.

WARNING DANGER

If engine does not stop when stop switch is moved to STOP

position, close choke - COLD START position - to stall engine.

Have your ECHO dealer repair stop switch before using blower

again.

PB-403H

PB-403T

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 27 28

Pas de commentaire

Echo PB-403T Manuel d'utilisateur Page 16