Echo RM-210SB Manuel d'utilisateur télécharger pdf (Page 27)

GRASS TRIMMER/BRUSH CUTTER

OPERATOR'S MANUAL

NYLON LINE REPLACEMENT

Level 1.

Parts Required: ECHO 0.095 in. Nylon Trimmer Line 6 m (20 ft.) long.

1. Shut engine off. Lay unit on the ground with head assembly up.

2. Hold drum (A) and firmly turn spool (B) CW (clockwise) until it

disengages from the inner drive. Pull spool from drum. DO NOT

push in on spool when turning.

3. Use one piece of new nylon line (C) 6 m (20 ft.) long and thread

through the molded loop (D) on the spool. Pull line tight and

adjust so one end is 15 cm (6 in.) longer than the other.

4. Hold the spool, opening toward you. Place index finger between

the two strands and wind line, tightly and evenly, in direction of

arrow (E) marked "CC".

5. Stop when approximately 15-20 cm (6-8 in.) line (C) remains and

place ends of line in notches (F) in spool (B).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Pas de commentaire

Echo RM-210SB Manuel d'utilisateur Page 27