Echo PPT-230 Manuel d'utilisateur télécharger pdf (Page 11)

POWER PRUNER

OPERATOR'S MANUAL

ASSEMBLY

Tools Required: 10x19mm (13/32x3/4in) T-wrench, 3 and 4 mm Hex

Wrenches

Parts Required: Power Head, Drive Shaft Assembly,

Cutting Attachment

DRIVE SHAFT / POWER HEAD

1. Loosen bolt (A).

2. Match square socket in engine shaft with square power transmis-

sion shaft (B) and slide together until engine rests against the

machine surface of lower drive shaft coupler (C).

3. Rotate lower drive shaft to align engine and rear handle assembly in

an upright position.

4. Tighten bolt (A) securely so engine will not rotate on lower shaft

tube.

CUTTING ATTACHMENT TO DRIVE SHAFT INSTALLATION

WARNING DANGER

Saw Chain is sharp! Always wear gloves when handling assembly,

otherwise serious personal injury may result.

1. Loosen the four (4) screws (D) and locator screw (E) on cutting

attachment.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Pas de commentaire

Echo PPT-230 Manuel d'utilisateur Page 11