Echo PPT-265S Manuel d'utilisateur télécharger pdf (Page 19)

Power Pruner

oPeraTor's Manual

Automatic Oiling System

1. Wipe debris from around oil ll cap.

2. Remove oil ll cap and ll reservoir with a quality, low viscosity

guide bar and saw chain oil.

NOTE

The discharge volume of the automatic oiler is preset to deliver 3

to 4 cc/min. at normal operating RPM. During heavy or dry cutting

conditions the oil discharge volume may be adjusted to assure ad-

equate lubrication. Rell the oil reservoir with each tank of fuel.

IMPORTANT

To prevent plastic deterioration, do not use synthetic or silicone

based oil.

adjustIng automatIc oIler

1. From bottom of gear case, turn adjustment screw (A) clockwise to

decrease oil volume - counter clockwise to increase oil volume.

NOTE

Very little visible oil on the saw chain will provide sufcient lubri-

cation.

lubrIcatIng the guIde bar and saw chaIn

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 39 40

Pas de commentaire

Echo PPT-265S Manuel d'utilisateur Page 19